How To Change Worx Edger & Trimmer

Cordless Grass Trimmer
User Guide
EN: P02
F: P15
ES: P24

WG183 WG183.9

PRODUCT SAFETY

Warning: This product can expose you lot to chemicals including lead and Di (2-Ethylhexyl) phthalate (DEHP) which are known to the State of California to crusade cancer and birth defects or other reproductive harm. For more information get to world wide web.P65Warnings.ca.gov.

IMPORTANT Prophylactic INSTRUCTIONS
Alert: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, burn, and/or serious injury.
WARNING: Read all instructions

FOR ALL APPLIANCES

1. Avert Dangerous Surround – Don't use appliances in damp or wet locations.
2. Don't Use In Rain.
3. Proceed Children Away – All visitors should be kept at a distance from the work area.
4. Wearing apparel Properly – Practice not clothing loose vesture or jewelry. They tin can be caught in moving parts. Utilize of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.
5. Use Safety Glasses – Always use a face up or dust mask if the operation is dusty.
6. Use Right Appliance – Do not employ an appliance for any job except that for which it is intended.
7. Don't Force Apparatus – It volition do the task ameliorate and with less likelihood of a risk of injury at the rate for which it was designed.
8. Don't Overreach – Keep proper footing and balance at all times.
9. Stay alert – Sentinel what you are doing. Use common sense. Do not operate appliances when y'all are tired.
10. Shop Idle Appliances Indoors – When not in employ, appliances should be stored indoors in dry, and high or locked-upwardly places – out of achieve of children.
11. Maintain Apparatus With Care – Keep the cutting edge abrupt and clean for best operation and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Go along handles dry out, make clean, and free from oil and grease.
12. Cheque Damaged Parts – Before further employ of the apparatus, a guard or other part that is damaged should exist carefully checked to make up one's mind that information technology will operate properly and perform its intended office. Bank check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and whatever other condition that may impact its operation. A baby-sit or other role that is damaged should exist properly repaired or replaced past an authorized service heart unless indicated elsewhere in this manual.

FOR ALL Bombardment-OPERATED GARDENING

1. Forbid unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, picking upward, or carrying the apparatus. Carrying the apparatus with your finger on the switch or energizing appliance that has the switch on invites accidents.
2. Disconnect the battery pack from the appliance before making whatsoever adjustments, irresolute accessories, or storing the apparatus. Such preventive safety measures reduce the risk of starting the appliance accidentally.
3. Recharge only with the charger specified by the manufacturer. A charger that is suitable for 1 type of bombardment pack may create a risk of fire when used with another battery pack.
4. Use appliances only with specifically designated battery packs. Use of any other bombardment packs may create a hazard of injury and fire.
5. When the bombardment pack is not in use, go along it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small-scale metal objects, that tin make a connection from one terminal to another. Shorting the battery terminals together may crusade burns or a burn down.
6. Under abusive conditions, liquid may exist ejected from the battery; avert contact. If contact accidentally occurs, affluent with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may crusade irritation or burns.
7. Do not employ a bombardment pack or apparatus that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
8. Do not expose a bombardment pack or appliance to fire or excessive temperature. Exposure to fire or temperature higher up 130°C may cause an explosion.
9. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures exterior of the specified range may damage the battery and increase the gamble of fire.
10. Have servicing performed by a qualified repair person using but identical replacement parts. This will ensure that the safety of the product is maintained.
11. Practice not change or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.

ADDITIONAL SAFETY RULES FOR LAWN TRIMMER AND Edge TRIMMER

1. Continue guards in place and in expert working order.
2. Keep easily and feet abroad from the cut area.
3. Do non use heavier lines than recommended in this manual.
4. Do non employ line materials of other types – for example, metallic wire, rope, and the like.

SAFETY WARNINGS FOR BATTERY PACK

a) Do not dismantle, open or shred battery pack.
b) Exercise not expose the battery pack to rut or fire. Avoid storage in directly sunlight.
c) Do not brusque-excursion a battery pack. Practice not store bombardment packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can brand a connection from one final to another. Shorting the bombardment terminals together may cause burns or burn down.
d) Do non remove the battery pack from its original packaging until required for utilize.
e) Do not subject the battery pack to mechanical stupor.
f) In the event of bombardment leaking, do non allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
g) Discover the plus (+) and minus (–) marks on the battery back and equipment and ensure correct utilise.
h) Exercise not use any battery pack which is non designed for use with the equipment.
i) Keep the battery pack out of the accomplish of children.
j) Seek medical advice immediately if a cell or battery has been swallowed.
thousand) Always purchase the battery pack recommended by the device manufacturer for the equipment.
50) Proceed the battery pack clean and dry out.
m) Wipe the battery pack terminals with a clean dry material if they get dirty.
n) Battery pack needs to be charged before employ. Always use the correct charger and refer to the manufacturer'due south instructions or equipment manual for proper charging instructions.
o) Do not leave battery pack on prolonged charge when not in use.
p) Afterwards extended periods of storage, it may be necessary to charge and belch the bombardment pack several times to obtain maximum performance.
q) Battery pack gives its best functioning when information technology is operated at normal room temperature (20 °C ± 5 °C).
r) When disposing of bombardment packs, keep bombardment packs of unlike electrochemical systems separate from each other.
s) Recharge merely with the charger specified past Worx. Practise not use whatsoever charger other than that specifically provided for utilize with the equipment. A charger that is suitable for one type of bombardment pack may create a risk of fire when used with another bombardment pack.
t) Retain the original product literature for future reference.
u) Use only the battery pack in the application for which it was intended.
v) Remove the battery pack from the equipment when not in employ.
due west) Dispose of properly.

SAVE THESE INSTRUCTIONS

SYMBOLS

	To reduce the risk of injury, user must read teaching manual
	Wear ear protection
	This function directs thrown objects abroad from the operator
	Li-Ion bombardment, battery must be recycled
	Wear protective gloves
	Brand sure the bombardment is removed prior to changing accessories.
	Trimming
	Lock
	Unlock
	Correct
	Incorrect
	Do non burn
	Batteries may enter water cycle if tending improperly, which tin be chancy for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
	POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRCcall2recycle seal. For ecology protection, please practice not discard batteries in the trash. Later on the batteries' life cycle is ended, then please call one-800-822-8837 for a free service that will properly dispose of the battery.

one. Bombardment PACK*	9. AUXILIARY HANDLE
2. ON/OFF SWITCH	x. LOCK OFF SWITCH
3. UPPER SHAFT	11. Battery INDICATOR LIGHT
4. HANDLE ADJUSTMENT KNOB	12. CUTTING HEAD (See FIG.I)
5. LOWER SHAFT	13. SPOOL CAP (Meet FIG. J)
6. Safety GUARD	xiv. CAP RELEASE LATCH (Meet FIG.J)
seven.LINE FEED Push	fifteen. SPOOL (Run into FIG.J)
eight. LINE CUTTER	16. EYELET (Encounter FIG.J)

* Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL Information

	WG183	WG183.9
Voltage	twoscore MAX(2x20V MAX) **
No Load Speed	6800 /min
Cutting Diameter	13″
Line Bore	0.065″
Line length	16 ft (Dual-Exit)
Battery type	Lithium-ion	/
Bombardment Model	WA3525 (two.0 Ah)	/
Charger Model	WA3770	/
Charger rating	Input: 120 Five~lx Hz, 100 Westward Output 1: twenty , ii.0 A ** Output 2: 20 , 2.0 A **	/

Charging time (approx.) Bombardment pack: two.0Ah (1pc) 2.0Ah (2pcs)	65mins 130mins	/
Machine Weight	6.4 lbs	4.7 lbs

**Voltage measured without workload. Initial battery voltage reaches a maximum of twenty volts. The nominal voltage is xviii volts.
*** Charger output 1 and output 2 hateful 2 ports with the aforementioned output voltage and current.

ACCESSORIES

	WG183	WG183.9
Battery pack (WA3525)	2	/
Charger (WA3770)	1	/
Spool (WA0007)	i	1
Spool cap(WA0216)	one	1
Condom guard	1	1
Auxiliary handle	1	i

Just use the appropriate accessories intended for this tool. Accompaniment information can be establish on the product packaging, at a Worx dealer or on our website at www.worx.com

Assembly & Operation

ACTION	Effigy
Associates
Assembling the Trimmer Shaft	See Fig. A
Assembling the Auxiliary Handle	See Fig. B
Assembling the Safety Baby-sit	Come across Fig. C
Installing and Removing the Bombardment Pack Annotation: • This machine will only run when two batteries are installed. It is recommended to use the same two batteries and charge the ii batteries at the same fourth dimension. • When you apply two batteries with different power, the machine will only run to the lower common denominator.	See Fig. D1, D2
Charging the bombardment pack NOTE: • The batteries are shipped uncharged. Each battery must be fully charged before the first use. •  Always fully accuse the two batteries at same time. More details tin be plant in the charger's manual.	Encounter Fig.D3
Bombardment power indicator on the machine Run into details in BATTERY Status section	Run across Fig.D4
OPERATION
On/Off Switch Alarm! The cut caput continues to  rotate after the trimmer has been switched off;  await until it has completely stopped then lay down the tool.	Encounter Fig. E
Trimming	Run into Fig. F
-Adjusting the Auxiliary handle	See Fig. G
Manually feeding the line	See Fig. H
Removing the Cap	Run into Fig. I
Cut Head	Encounter Fig. J
Changing the line spool	See Fig.K,L
Manually winding the line	See Fig. G,Northward,O,P

Battery STATUS (Come across Fig. D4)

Before starting or after employ, press the button abreast the power indicator light on the machine to check the battery capacity. During performance, the battery chapters will be indicated automatically by the battery power indicator. The indicator constantly senses and displays the battery condition equally follows. For the machine with 2 battery packs with different power, the power indicator light displays the bombardment condition with the lower 1 of the ii batteries.

Bombardment power indicator status	Battery condition
V greenish lights () are illuminated.	The 2 batteries are in a highly charged condition.
Two, three or 4 green lights are illuminated.	The ii batteries have a remaining charge. The more lights are illuminated the more battery capacity.

Only one light-green low-cal() is illuminated.	At least 1 bombardment is almostdepleted and needs to be charged.
No light is illuminated.	At least one battery is not fully installed or battery may be lacking.
Only one light is flashing twice per cycle.	At least i battery is over discharged (please refer to the battery charge condition), delight recharge the two batteries at once before use again or storage.
But one light is flashing three timesper wheel.	At least ane battery is hot, wait for them absurd down before start again.
Merely i light is flashing four times per cycle.	The automobile is over load. Heighten the cut pinnacle or push slowly.

Operation INSTRUCTIONS

WARNING! The charger and battery pack are specially designed to work together so do not effort to use any other devices. Never insert or allow metal objects into your charger or battery pack connections because of an electrical failure and hazard will occur.

1. Automated LINE FEED Organisation
   When initially switching on the trimmer, a small length of line is fed out. A 'clattering' noise will be heard for a brusque time. This is normal and is caused past the line being cutting past the line cutter. In one case the line is cut to the correct length, the 'clattering' racket will stop and the trimmer motor will run at total speed. To feed more line, stop the trimmer completely, so restart, assuasive the motor to reach full speed. Repeat this until yous hear the 'clattering' noise of the line cut. (Do not repeat this procedure more than than 6 times)
2. MANUALLY FEEDING THE LINE (See Fig. H)
   Press and release transmission line feed push, whilst gently pull out the lines until the lines reach the line cutter. When the required amount of line is fed out, gently pull on the second line (there is no need to press the transmission line feed button once again). If the line extends past the line cutter, too much line has been fed out. If also much line is fed out, remove the spool cap and rotate the spool anti-clockwise until the line is at the desired length.
   Removing the Cap (See Fig. I)
   Press and hold in the two latches. Pull the spool cap away from the Cut Head. Keep the cap and spool holder clean from droppings. To replace the cap, press it firmly towards the spool holder. Ensure that it is correctly connected by trying to remove it without depressing the ii latches.
   Irresolute the Line Spool (See Fig. Thou, L)
   Offset, take off the cap and remove the onetime spool. Place new spool into cut caput. Feed one line through the eyelet, so repeat for the 2d line (Meet Fig. 50). Release line from the cleat on the Spool. Reattach the cap. Warning! Your Trimmer is designed to only use lines with a maximum diameter of 0.065"(1.65mm). Only use nylon line. IMPORTANT – Always wind the line onto the upper department of the spool first.
3. 3. MANUALLY WINDING THE LINE (Encounter FIG.Thousand, North, O, P)
   Take approximately 16ft (5 m) line and insert 5/8" (15 mm) of line into one of the holes in the upper section of the spool. Air current the line in the direction of the arrows on the meridian of the spool.
   Get out approximately 3.ix'' (100 mm) of line unwound and place it into the cleat. Echo on the lower section of the spool. Intendance should be taken to ensure that the line is neatly coiled on the spool. Failure to practice so will impair the efficiency of the automatic line feed. Then fit the spool as described above in "Changing the Line Spool".

STORING YOUR GRASS TRIMMER

Ever remove the battery pack from your trimmer afterwards use. To store your grass trimmer
The trimmer is provided with a hanging slot for storing the trimmer on the wall. (See Fig. Q) Store in a dry out place where the trimmer and battery can be protected from damage.

MAINTENANCE

Always remove the battery pack from your trimmer afterward apply. E'er check the product prior to being used for any damage. Afterwards use, disconnect the battery from the tool and check for damage. Your power tool requires no boosted lubrication or maintenance. There are no user-serviceable parts in your ability tool. Never use h2o or chemical cleaners to make clean your ability tool. Wipe clean with a dry out cloth. Always store your power tool in a dry room temperature location. Keep the motor ventilation slots clean. Keep all working controls free of dust.

FOR BATTERY TOOLS

The ambient temperature range for the use and storage of tool and bombardment is 0 ℃-45℃.
The recommended ambience temperature range for the charging system during charging is 0℃-40 ℃.

TROUBLESHOOTING

The post-obit table gives problems and actions that yous can perform if your automobile does not operate correctly. If these do not identify and correct the problem, contact your
Worx Client Service at 1-866-354-Worx.
Alert: Switch the machine off and remove the battery prior to any troubleshooting.

Problems	Possible Causes	Cosmetic Activity
Trimmer fails to operate.	Battery discharged. Battery too hot/ common cold. Motor is cleaved. Internal wiring of machine damaged.	Recharge battery; too come across the content in charger manual Allow to cool/ warm. Contact Service Agent. Contact Service Agent.
Trimmer runs intermittently.	Motor is broken. Battery not fully charged. On/Off switch defective.	Contact Service Agent. Recharge bombardment. Contact Service Agent.
Excessive vibrations/ racket.	Machine defective. Line spool is not wound well.	Contact Service Amanuensis. Rewind the line. Encounter  "MANUALLY WINDING THE LINE"
Cut time per battery accuse too short	Battery has not been used for long period or only charged for curt term. Grass too high. Battery defective.	Fully charge battery; too encounter the content in charger manual. Cut in stages. Replace the bombardment.
Automobile does not cut.	Line broken. Battery not fully charged.  Motor  is cleaved (speed is too depression). Grass entangled effectually cutting caput.	Replace the line Recharge battery; too see the  content in charger manual. Contact Service Amanuensis. Remove grass.

Continuous	Battery not	Properly insert
lighting of	(properly)	bombardment into
the battery accuse indicator.	inserted. Battery contacts	bombardment charger. Clean the battery
No charging	contaminated.	contacts or
procedure		supersede the
possible.		battery.
	Bombardment	Replace the
	defective.	battery.
Battery	Plug of battery	Insert mains plug
charge	charger not	(fully) into the
indicator does	plugged in	socket outlet.
not light upward.	(properly).
		Check the mains
	Socket outlet, mains cablevision or	voltage; have the battery charger
	battery charger	checked by an
	defective.	authorized later-sales service agent.
Auto feed	Cut line is	Manually feed the
does	non wound well.	line, if still tin not
not piece of work	The line is	feed out, remove
	tangled.	the Spool out and rewind the line.
	Line is used up.	Supersede with a new spool of line.

Documents / Resources

References

Source: https://manuals.plus/worx/cordless-grass-trimmer-manual

Posted by: liddellpacconte.blogspot.com

Share this post